R1
// \
R2__R3
R1 and R2 are connected via a T1 link (Network ID: 10.2.1.0/24
AND a 56K link (Network ID: 10.2.2.0/24)
R1 and R3 are connected via a T1 link (Network ID: 10.2.3.0/24
R2 and R3 are connected via ethernet (Network ID:10.1.4.0/24)
R1, R2 and R3 are running IGRP 200
The goal is to configure R1 for unequal load balancing and see 2 routes
for network 10.1.4.0 in the routing table.
PROPOSED SOLUTION:
>From R1, the metric of the T1 route to 10.1.4.0 would be:
delay bandwidth=(2000+100)+10^(7)/15440 = 8576
>From R1, the metric of the 56K route to 10.1.4.0 would be:
delay bandwidth=(2000+100)+10^(7)/56 = 180671
So the variance would be 22 because 180671/8576 = 21.07
On R1, we should configure the variance as 22
Does that look right?
Pierre-Alex
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=31693&t=31693
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
