Not sure specifically what you are trying to test but you can be selective and with a 'debug ip packet detail ACL Number/Name '. Make up a ACL of what traffic you're 'curious' about but obviously you need to judge if debugging this ACL will cause your router to get knocked unconscious.
Warning: If you delete the ACL you are debugging with the debugging still on, the router will default back to debug 'ip packet detail'(BAD) -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of McHugh Randy Sent: Sunday, 13 January 2002 9:44 AM To: [EMAIL PROTECTED] Subject: Command to tell if traffic is passing [7:31743] All, Is there any show or debug command on a Cisco router to tell if traffic is a passing through a router or interface on the router that is not to instrusive or disruptive? Thanks Randy Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=31747&t=31743 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
