When you say that "it doesn't work", what exactly are the symptoms?
""Stephane Wantou Siantou"" wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > Hi everybody, > I am trying to configure a Cisco 2509 access server to access my 3 routers > RouterA, RouterB,and RouterC so that I don't have to use the console cable > to access each > router. But it doesn't > w work. I am using an octal cable. 3 cables from the octal cable are > connected to RouterA, RouterB, and RouterC and the terminal server is > accessed with a console cable. What am I doing wrong can anyone help? Do > I need to configure anything on RouterA, RouterB, and RouterC to be > accessed from the access server? This is the configuration of the > access server. > Thanks, > Stephane > > Current configuration: > ! > version 12.0 > service timestamps debug uptime > service timestamps log uptime > no service password-encryption > ! > hostname terminal_server > ! > ! > ip subnet-zero > ip host RouterA 2001 172.16.1.1 > ip host RouterB 2002 172.16.1.1 > ip host RouterC 2003 172.16.1.1 > ! > ! > ! > interface Loopback0 > ip address 172.16.1.1 255.255.255.255 > no ip directed-broadcast > ! > ip classless > ! > line con 0 > transport input none > line 1 8 > no exec > transport input all > line aux 0 > line vty 0 4 > login > ! > end Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=31810&t=31801 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
