Hi all :

I can't connection to hongkong IMS dsl network .
Any comment about my config ? or any  exiting config ?

--
^_^
Regard,
eric

version 12.2
no parser cache
service timestamps debug uptime
service timestamps log uptime
service password-encryption
!
hostname Router
!
logging buffered 102400 debugging
enable password 7 011015075
!
ip subnet-zero
!
vpdn enable
!
vpdn-group 1
 request-dialin
  protocol pppoe
!
!
 --More--         !
!
interface Ethernet0
 ip address 192.168.0.9 255.255.255.0
 ip nat inside
!
interface Ethernet1
 description connection to IMS
 no ip address
 pppoe enable
 pppoe-client dial-pool-number 1
 hold-queue 32 in
!
interface Dialer0
 description pppoE dialer
 mtu 1492
 ip address negotiated
 ip nat outside
 encapsulation ppp
 dialer pool 1
 dialer-group 1
 pulse-time 0
 ppp pap sent-username 1212@ultraline password 7 1212
 --More--         !
ip nat inside source list 1 interface Dialer0 overload
ip classless
ip route 0.0.0.0 0.0.0.0 Dialer0
no ip http server
no ip pim bidir-enable
!
access-list 1 remark NAT list
access-list 1 permit 192.168.0.0 0.0.0.255
dialer-list 1 protocol ip permit
!
!
line con 0
line vty 0 4

 login
!
end


Dialer0 is up, line protocol is up (spoofing)
  Hardware is Unknown
  Description: pppoE dialer
  Internet address will be negotiated using IPCP
  MTU 1492 bytes, BW 56 Kbit, DLY 20000 usec,
     reliability 255/255, txload 1/255, rxload 1/255
  Encapsulation PPP, loopback not set
  Last input never, output never, output hang never
  Last clearing of "show interface" counters 00:20:35
  Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 0
  Queueing strategy: weighted fair
  Output queue: 0/1000/64/0 (size/max total/threshold/drops)
     Conversations  0/0/16 (active/max active/max total)
     Reserved Conversations 0/0 (allocated/max allocated)
     Available Bandwidth 42 kilobits/sec
  5 minute input rate 0 bits/sec, 0 packets/sec
  5 minute output rate 0 bits/sec, 0 packets/sec
     0 packets input, 0 bytes
     0 packets output, 0 bytes




Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=32502&t=32502
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]

Reply via email to