Hello,
I have 3 routers running both Eigrp 1 and Igrp 100. I configed. a
distance of 4 for Igrp so that it would be the preferred protocol but
the routing table shows both Eigrp and Igrp learned route for the same
netw. I am trying to understand why? I expected to only see Igrp learned
routes since the lower admin dist. of 4 would take over Eigrp's dist.
of 90...but it is not apparently so. Any ideas? Thank you.
Example
on RTC:
6.0.0.0/8 is variably subnetted, 2 subnets, 2 masks
D 6.6.6.6/32 [90/40640000] via 192.168.10.241, 00:00:05, Serial0
I 6.0.0.0/8 [4/158750] via 192.168.10.241, 00:00:05, Serial
Config. on RTC: !
router eigrp 1
passive-interface Ethernet0
network 7.0.0.0
network 192.168.10.0
no auto-summary
!
router igrp 100
passive-interface Ethernet0
network 7.0.0.0
network 192.168.10.0
distance 4
!
_________________________________________________________________
Chat with friends online, try MSN Messenger: http://messenger.msn.com
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=33760&t=33760
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
