Hello All,
I have a user with a full T1 frame relay circuit and a user with a 384k frac
T1 circuit. The problem is the user with full T1 is trying to do a big SQL
query that seems to time out after about 6 minutes of trying but the 384k can
run the same query in about 3 minutes. The full T1 seems responsive and here
is the sh int about 45 mins after router reboot. Any responses would be
greatly appreciated.
*****************************************************************************
*****************************************************************************
***********
Serial0 is up, line protocol is up
Hardware is PQUICC with Fractional T1 CSU/DSU
MTU 1500 bytes, BW 1544 Kbit, DLY 20000 usec,
reliability 255/255, txload 4/255, rxload 3/255
Encapsulation FRAME-RELAY, loopback not set
Keepalive set (10 sec)
LMI enq sent 321, LMI stat recvd 321, LMI upd recvd 0, DTE LMI up
LMI enq recvd 0, LMI stat sent 0, LMI upd sent 0
LMI DLCI 0 LMI type is ANSI Annex D frame relay DTE
Broadcast queue 0/64, broadcasts sent/dropped 105/0, interface broadcasts
50
Last input 00:00:00, output 00:00:00, output hang never
Last clearing of "show interface" counters 00:53:44
Input queue: 1/75/0/0 (size/max/drops/flushes); Total output drops: 0
Queueing strategy: fifo
Output queue :0/40 (size/max)
5 minute input rate 22000 bits/sec, 29 packets/sec
5 minute output rate 29000 bits/sec, 49 packets/sec
11131 packets input, 1847898 bytes, 0 no buffer
Received 0 broadcasts, 0 runts, 0 giants, 0 throttles
0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored, 0 abort
16526 packets output, 1309436 bytes, 0 underruns
0 output errors, 0 collisions, 1 interface resets
0 output buffer failures, 0 output buffers swapped out
1 carrier transitions
DCD=up DSR=up DTR=up RTS=up CTS=up
Serial0.1 is up, line protocol is up
Hardware is PQUICC with Fractional T1 CSU/DSU
Internet address is XXX.XX.XX.X/24
Backup interface BRI0, failure delay 0 sec, secondary disable delay 0 sec
MTU 1500 bytes, BW 1544 Kbit, DLY 20000 usec,
reliability 255/255, txload 4/255, rxload 3/255
Encapsulation FRAME-RELAY
*****************************************************************************
*******************************************************************
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=34264&t=34264
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
