Here is the deal, I have a cat5000 with a sup III an RSM (ws-x5302) and a VIP2 with an ATM OC3 module installed (PA-A3-OC3SMI). I cannot see the ATM OC3 from the RSM. From the sup III I see the expansion module but after I session into the RSM nothing on a show run or a show int. This happened after a software upgrade on both the sup III and the RSM. The sup III was 3.2(8) and now it is 6.3(2), as for the RSM it was 12.0 but now the boot and the running IOS is 12.1(10). Can anyone help me???
Joe Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=34330&t=34330 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
