12 code requires additional DRAM and Flash on the VIP2s. You might want to check what you have vs what is required. Show diag should tell you what you have.
> -----Original Message----- > From: wu343 [mailto:[EMAIL PROTECTED]] > Sent: Tuesday, February 05, 2002 2:15 PM > To: [EMAIL PROTECTED] > Subject: VIP2 microcode [7:34504] > > > I have a vip2 rsm combo and I am unable to see an atm module > in the vip2. > This > happened after I upgraded the IOS to 21.1(10) on the rsm. I > have been doing > some research and I think it may have to do with a microcode > that is invalid > for the 12.1 software. If so then were can I get an upgraded > microcode. If I > am way off base does anyone else have any ideas. > > Joe Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=34509&t=34504 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
