I found that I can configured it on the other cisco 1700, but my Cisco 2500
can't work. So I think not only 72xx will do
JKT02(config)#scheduler ?
allocate Guarantee CPU time for processes
interval Maximum interval before running lowest priority process
process-watchdog Action for looping processes
JKT02(config)#scheduler allocate ?
Microseconds handling network interrupts
JKT02(config)#exit
JKT02#sh ver
Cisco Internetwork Operating System Software
IOS (tm) C1700 Software (C1700-Y-M), Version 12.1(4), RELEASE SOFTWARE (fc1)
Copyright (c) 1986-2000 by cisco Systems, Inc.
Compiled Wed 30-Aug-00 08:36 by cmong
Image text-base: 0x80008088, data-base: 0x805D8590
ROM: System Bootstrap, Version 12.0(3)T, RELEASE SOFTWARE (fc1)
>From: "Chuck Larrieu"
>Reply-To: "Chuck Larrieu"
>To: [EMAIL PROTECTED]
>Subject: Re: why I can't configure scheduler allocate? [7:34579]
>Date: Tue, 5 Feb 2002 22:59:08 -0500
>
>I believe that the scheduler allocate command is available only on the 72xx
>and above series routers. This according to CCO.
>
>Check it out:
>
>http://www.cisco.com/univercd/cc/td/doc/product/software/ios121/121cgcr/fun_
>r/frprt3/frd3003.htm#1019340
>watch the wrap.
>
>didn't I answer this question yesterday?
>
>Chuck
>
>
>
>
>""Sharon Kantan"" wrote in message
>[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> > I want to configure scheduler allocate for my router. But it can't be
>done,
> > I heard the scheduler allocate was introduced in IOS ver 11.2 and I have
> > just upgraded my access server (AS2509RJ) to ver 12.0(4) but still I
>can't
> > configured it. why? Did I use the wrong binary?
> >
> >
>%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
>%%%%
> >
> > access_server#conf t
> > Enter configuration commands, one per line. End with CNTL/Z.
> > access_server(config)#scheduler ?
> > interval Maximum interval before running lowest priority
>process
> > process-watchdog Action for looping processes
> >
>%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
>%%%%%
> >
> > Besides, I saw 2 different version of IOS in the sh ver output, 1) the
> > 12.0{4} in the second line. and 2)System Bootstrap, Version 11.0(10c)XB1
>in
> > the sixth line. What is the different? Which is my real IOS now.
> >
> > access_server#sh ver
> > Cisco Internetwork Operating System Software
> > IOS (tm) 2500 Software (C2500-I-L), Version 12.0(4), RELEASE SOFTWARE
>(fc1)
> > Copyright (c) 1986-1999 by cisco Systems, Inc.
> > Compiled Wed 14-Apr-99 21:06 by ccai
> > Image text-base: 0x0302E834, data-base: 0x00001000
> >
> > ROM: System Bootstrap, Version 11.0(10c)XB1, PLATFORM SPECIFIC RELEASE
> > SOFTWARE
> > (fc1)
> > BOOTFLASH: 3000 Bootstrap Software (IGS-BOOT-R), Version 11.0(10c)XB1,
> > PLATFORM
> > SPECIFIC RELEASE SOFTWARE (fc1)
> >
> > access_server uptime is 1 hour, 48 minutes
> > System restarted by reload
> > System image file is "flash:c2500-i-l.120-4.bin"
> >
> > cisco AS2509-RJ (68030) processor (revision K) with 6144K/2048K bytes of
> > memory.
> > Processor board ID 20478542, with hardware revision 00000000
> > Bridging software.
> > X.25 software, Version 3.0.0.
> > 1 Ethernet/IEEE 802.3 interface(s)
> > 1 Serial network interface(s)
> > 8 terminal line(s)
> > 32K bytes of non-volatile configuration memory.
> >
> >
> >
> >
> >
> > _________________________________________________________________
> > Chat with friends online, try MSN Messenger: http://messenger.msn.com
_________________________________________________________________
Send and receive Hotmail on your mobile device: http://mobile.msn.com
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=34595&t=34579
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
