I have 15 different subnets on a eth 0/0 on a 2621 router with 15 secondary addresses . I want to know if it is possible to change them to subinterfaces and trunk more than one subnet accross a 2924 switch and pust more than one subnet in the same vlan/port. That means putting more than one subnet on one port in the same vlan. The subnets could be contiguous.
For instance: ip address 64.41.x.241 255.255.255.248 secondary ip address 64.41.x.249 255.255.255.248 secondary Or most are discontiguous. I did not think it could be done but just wanted to throw it out there to see if anyone had a solution. Thanks, randy Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=34975&t=34975 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
