Hi all, I just setup a Cisco 2600 router with x.25 config. Its serial 0/1 is connected to a x.25 device. At the router, it can PAD to the x.25 device but it was failed to PAD itself. Can anyone help me? The configuration and debug messages are as follow:
: : service pad to-xot service pad from-xot : x25 routing : interface Serial0/1 bandwidth 128000 no ip address encapsulation x25 dce x25 address 60020 pad 60020 Trying 60020... % Connection refused by remote host APAR06# *Mar 19 03:18:17.517: Serial0/0: X.25 O R1 Call (12) 8 lci 1 *Mar 19 03:18:17.517: From (0): To (5): 60020 *Mar 19 03:18:17.517: Facilities: (0) *Mar 19 03:18:17.517: Call User Data (4): 0x01000000 (pad) *Mar 19 03:18:17.561: Serial0/0: X.25 I R1 Clear (5) 8 lci 1 *Mar 19 03:18:17.561: Cause 0, Diag 128 (DTE originated/Unknown diagnostic) *Mar 19 03:18:17.561: Serial0/0: X.25 O R1 Clear Confirm (3) 8 lci 1 Regards, Dovelet Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=35026&t=35026 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
