Depends on the nature of your client and their network access patterns! For example - http is very asynchronous traffic ... always pulling more than pushing :). Does this number remain consistently "high", or just when you happened to check it this time?
If it really bothers you, go to your next hop down switch and check the interfaces ... look for the "high bandwidth utilization" there as well. Continue doing so until you find the machine ... Thanks! TJ At 11:07 PM 2/8/02, kaushalender wrote: >hi group >I have strage roblem .The problem is i have a 128 kbps link to my >customer.When I see the interface on which customer is connected the >incoming traffic is less and outgoing traffic is very high .Why this is >happening .Plz tell me >This is the int as u seeing clearly 47000 is incoming from customer and >192000 is outgoing to customer >Thanx > > >Serial0/2 is up, line protocol is up > Hardware is PowerQUICC Serial > Description: "RAINBOW AND VERTEC" "REM-2" > Internet address is 216.252.243.1/30 > MTU 2048 bytes, BW 512 Kbit, DLY 20000 usec, > reliability 255/255, txload 95/255, rxload 23/255 > Encapsulation PPP, loopback not set > Keepalive set (10 sec) > LCP Open > Listen: CDPCP > Open: IPCP > Last input 00:00:00, output 00:00:00, output hang never > Last clearing of "show interface" counters 2d02h > Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 1769 > Queueing strategy: weighted fair > Output queue: 0/1000/64/0 (size/max total/threshold/drops) > Conversations 0/30/256 (active/max active/max total) > Reserved Conversations 0/0 (allocated/max allocated) > Available Bandwidth 384 kilobits/sec > 5 minute input rate 47000 bits/sec, 68 packets/sec > 5 minute output rate 192000 bits/sec, 58 packets/sec > 4251918 packets input, 655572206 bytes, 0 no buffer > Received 0 broadcasts, 0 runts, 1 giants, 0 throttles > 94 input errors, 2 CRC, 87 frame, 0 overrun, 0 ignored, 5 abort > 4168853 packets output, 1573135961 bytes, 0 underruns > 0 output errors, 0 collisions, 13 interface resets > 0 output buffer failures, 0 output buffers swapped out > 0 carrier transitions > DCD=up DSR=up DTR=up RTS=up CTS=up ***************************************************************************** The information in this email is confidential and may be legally privileged. It is intended solely for the addressee. Access to this email by anyone else is unauthorized. If you are not the intended recipient, any disclosure, copying, distribution or any action taken or omitted to be taken in reliance on it, is prohibited and may be unlawful. When addressed to our clients any opinions or advice contained in this email are subject to the terms and conditions expressed in the governing KPMG client engagement letter. ***************************************************************************** Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=35080&t=34937 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
