I'm trying to nat on port 7206, however, when accessed the router responds with port 1142. Can anyone tell me why the router is returning dynamically translating a new port (1142, 1142) number?
ROUTER CONFIG NAT COMMANDS: ip nat inside source static 10.1.210.2 66.45.11.193 ip nat inside source static tcp 10.1.210.8 7206 66.45.11.193 7206 extendable DEBUG OUTPUT: 10w1d: NAT: o: tcp (165.137.188.231, 2335) -> (66.45.11.193, 7206) [8641] 10w1d: NAT: ipnat_allocate_port: wanted 7206 got 1142 10w1d: NAT: i: tcp (10.1.210.8, 7206) -> (165.137.188.231, 2335) [14833] 10w1d: NAT: o: tcp (10.1.210.1, 23) -> (10.1.210.6, 35329) [653] 10w1d: NAT: o: tcp (165.137.188.231, 2335) -> (66.45.11.193, 7206) [10433] 10w1d: NAT: ipnat_allocate_port: wanted 7206 got 1143 10w1d: NAT*: i: tcp (10.1.210.8, 7206) -> (165.137.188.231, 2335) [14834] 10w1d: NAT: i: tcp (10.1.210.8, 7206) -> (165.137.188.231, 2335) [14835] ** This is a transmission from Interelate and may contain information which is confidential. If you are not the addressee, note that any disclosure, copying, distribution or use of the contents of this message is prohibited. If you have received this transmission in error, please destroy it and notify us immediately at (877) 714-1943 or [EMAIL PROTECTED] ** Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=35210&t=35210 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
