I believe that your problem isn't that you aren't doing the correct sequence, but I think that if you are trying to send the break from win nt/2000 it doesn't work.... unless you know how to set it. You do need a machine that sends the break key.
Farooq Ali wrote: >Hi All: > >I would appreciate if some one can help me in the right direction: >scenario: > >Trying to install Tacacs on a Win2k server, copied the config for the NAS >from the install window of TACACS. It has the command to TACACS all >lines, vtys,con,aux,telnet. Then the TACACS install is not complete and >now cannot log into the router. Telnet, Aux and con all require Username >and Password. Read the documentation and found out that authorization >should have been only on PPP or vty lines, not console, so a 3600 router >sits locked up. Its a non production test router . Any ideas on how to > >reset the router.... > >Have tried the password Recovery procedure, but not sure , if am able to >send the correct" break" signal, but trying to do the "break" signal isnt >working. Has anyone done this before....Thanks in advance. > >-- > >_______________________________________________ > >Win a ski trip! Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=35233&t=35223 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
