Sujal thought it could be case, just couldn't remember as it was some time back,
Thanks ""Sujal G. Ajmera"" wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > Pat and Rich: > > I had a similar problem and got it solved just today. > > What we did was change the IOS and that made a difference. > > Sujal > > > Richard > > > > I've had the very same problem some time ago, it was really annoying, can > > you post the config, it'll probably jog my memory as to what was wrong > > > > Cheers > > > > Pat > > ----- Original Message ----- > > From: ""Richard Botham"" > > Newsgroups: groupstudy.cisco > > Sent: Thursday, February 07, 2002 6:13 PM > > Subject: VOIP & Vic-2fx cards [7:34768] > > > > > > > Hi All, > > > > > > I have 2 x Cisco 2621 routers and each have a 2port fxs voice card - > > > vic-2fxs installed. > > > > > > When I plug my phone into port 1/0/0 of a vic-2fxs card installed in a > > 2621 > > > I get dial tone. > > > > > > When I use port 1/0/1 I do not get dial tone. > > > > > > Is there any reason for this and what am I doing wrong. > > > > > > Regards > > > Richard > > _________________________________________________________ > > Do You Yahoo!? > > Get your free @yahoo.com address at http://mail.yahoo.com Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=35276&t=34768 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
