Sean,
Looks like the power supply problem here !
The power supply must be going down and coming on again !
Plug off the power supply and bring the device on the standby power supply
only.
Henry D'souza,
Infrastructure development & Management,(IDM),
TATA CONSULTANCY SERVICES
Seepz, Mumbai , 400096.
Hello # 8291680 ext 1208.
Direct line 8292406
@ Pager 9624 - 370346.
"Sean
Knox"
cc:
Sent by: Subject: Cat5k Reboots
sporadically [7:35477]
nobody@groups
tudy.com
02/15/2002
12:52
PM
Please
respond
to
"Sean
Knox"
I have a old Catalyst 5500 that is continually resetting. A show log
displays:
Console> (enable) show log
Network Management Processor (ACTIVE NMP) Log:
Reset count: 538
Re-boot History: Feb 15 2002 01:46:06 0, Feb 15 2002 00:10:24 0
Feb 15 2002 00:03:35 0, Feb 14 2002 14:13:25 0
Feb 14 2002 14:07:15 0, Feb 14 2002 14:05:16 0
Feb 14 2002 13:12:20 0, Feb 14 2002 11:29:54 0
Feb 14 2002 11:05:38 0, Feb 14 2002 10:35:35 0
Bootrom Checksum Failures: 0 UART Failures: 0
Flash Checksum Failures: 0 Flash Program Failures: 0
Power Supply 1 Failures: 65 Power Supply 2 Failures: 0
Swapped to CLKA: 0 Swapped to CLKB: 0
Swapped to Processor 1: 0 Swapped to Processor 2: 0
DRAM Failures: 0
Exceptions: 0
Loaded NMP version: 4.5(12)
Reload same NMP version count: 176
Last software reset by user: 2/15/2002,00:10:13
---- output omitted ----
I'm assuming the 65 power supply 1 failures is a possible cause? Does this
indicate a dying power supply and the source of the resets, or is something
else to blame?
- Sean
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=35479&t=35477
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
