Depends on which Teltone model. The Demonstrator has only U interfaces. > -----Original Message----- > From: Thomas Crowe [mailto:[EMAIL PROTECTED]] > Sent: Friday, February 15, 2002 11:03 AM > To: [EMAIL PROTECTED] > Subject: RE: Teltone setup/NT1 setup question... [7:35439] > > > Actually the Teltone connections are for S/T interfaces. So > you can remove > the Adtran ACEs and plug your routers directly into the > Teltone. The ACE's > are just to convert the U interface to a S/T interface. > > ______________________________ > > Thomas Crowe > Senior Systems Engineer / Architect > CTS Professional Services - Atlanta > ______________________________ > > -----Original Message----- > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] > Sent: Thursday, February 14, 2002 4:43 PM > To: [EMAIL PROTECTED] > Subject: Teltone setup/NT1 setup question... [7:35439] > > > > > Hello everyone... > > Okay this is the first time I've setup ISDN simulator so bare > with me. I > basically have TWO cisco routers. A 2503 and a 2522 both of > which have a > BRI. I also have two > Adtran NT1's ACE..on the back of these...there are TWO > S/T(Local) ports and > to the right of it there is a Network U port. On the side of > it there are > two LOCAL BUS switches. On one switch it says configuration > and switch > options are: SHORT and LONG...and the other switch is the Termination: > Options are NONE...50....100. > > Im assuming the NT1 setup should be like this, but I'm not sure: > > On the Teltone Simulator: PORT 1 goes to NETWORK port on > Adtran ...and then > from Adtran S/T port to the BRI port on the Router....however > what would be > the setup on the adtrans since I get an illuminated ERROR > light with the > READY light blinking once every second. If anyone knows > please let me know > > thank you > > [GroupStudy.com removed an attachment of type text/x-vcard > which had a name > of Thomas Crowe.vcf]
Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=35516&t=35439 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
