You must have a translation defined if you are going from outside to inside, the extendable allows for multiple port to be used in translations to the same ip. For instance, the outside interface ip address can be mapped to serveral different ip addresses on the inside for different ports.
Inside to outside statics are defiend by ip nat statment and access list, the extendable at the end enables NAPT or PAT. Chris ""Tim Booth"" wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > ------------------------------ > Try this command: > > ip nat inside source static tcp 192.168.1.1 23 209.xxx.xxx.xxx 23 > extendable > > This will map the telnet port of the outside IP address to the inside, > should work for you, let us know. > ------------------------------ > > Guy, > > Thanks very much. It fixed the problem. However, I'm curious as to WHY > I needed to do this and what does the extendable command function to do? > > Thanks, > Tim Booth > MCDBA, CCNP, CCDP, CCIE written > ----------------------------------------- > Those who would give up essential liberty to purchase a little temporary > safety deserve neither liberty nor safety. > Benjamin Franklin, 1759 Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=35670&t=35634 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
