Hi Gragg, here is what I found on the Open Forum:
Question: What does this errormessage mean:"%NIM-2-BADNIMID: Bad NIM ID (Oxe) in slot 1.- mean? Process = "*Init*", level=5- Traceback = 1031db8 103d42 103fe70 103d01e 100d068 100058c 10086d8 10001"Cisco 4000, software 10.2(2)? Answer: Bus communication on this device has failed. This could be due to a hardware or a software failure (most likely cause is hardware). Please open a case with the TAC and discuss this with an engineer. Other things to try are re-seating the NIM, starting the router with no interfaces attached, and check the power available to make sure it is within spec (i.e low voltage, spikes). Other causes include installing the NIM without the proper version of IOS (i.e 4T with 9.1). Regards, Georg Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=35731&t=35689 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
