At 05:11 AM 2/18/02, Godswill HO wrote: >You can still use your former ISP's DNS records while using the new ISP's >bandwidth. It does not matter who owns the DNS server. Everybody have access >to it once they are in the internet. Except when they are specifically >filtered. > >The only drawn back is that, Your new ISP have to forward the packet in a >round trip to the old ISP's network through the internet before they are >resolved and sent back to you machine,
It would depend on what records they are accessing. If the users are going to the Internet and accessing sites such as www.cisco.com and www.groupstudy.com, for example, the DNS queries don't have to go back to the original ISP. >had it been you are using the DNS of >your new ISP, these request would stop there. Do not loose your sleep, >because at the worst these delays are in milisseconds and not easily >noticeable by the eye, more each machine have a cache so it does not forward >every request. Great if you have a Cache Engine to compliment the machine's >cache. > >Whatever, you are kool and everything will be fine, switch to your new ISP >and enjoy. > >Regards. >Oletu >----- Original Message ----- >From: Michael Hair >To: >Sent: Sunday, February 17, 2002 8:07 PM >Subject: DNS Request Redirection [7:35703] > > > > I was wondering what is the best way to take care of the following: > > > > I have been using a private address space behind a Cisco 4500 router > > connected up to our current ISP using NAT, now we want to move our > > connection from our current ISP to a new ISP with better bandwidth. My > > problem is that we don't want to change all our client machines TCP/IP > > settings, which are all static, for some reason or another they were all > > setup to use our ISP's DNS. Not my idea but that another problem. So how >can > > I setup our router to forward requests looking from our current ISP's DNS >to > > our new ISP's DNS without touching all the client machines. > > > > Would the best way be to use policy-base routing? > > > > Would a static route work? > > > > Could I use a static route under NAT? > > > > If someone could proved me a sample of how you could do this I would be > > greatful... > > > > Thanks > > Michael >_________________________________________________________ >Do You Yahoo!? >Get your free @yahoo.com address at http://mail.yahoo.com ________________________ Priscilla Oppenheimer http://www.priscilla.com Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=35750&t=35703 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
