All,
I have a 3 3548's on a floor, the top and bottom ones are connected to
the core 6509's by fiber GBIC's. The middle one however is only connected
via a giga stack connector to the top and bottom switch.
Configuration for Gig0/1 (the Gigastack connector)
interface GigabitEthernet0/1
switchport trunk encapsulation dot1q
switchport trunk allowed vlan 1,7,1002-1005
switchport mode trunk
end
The middle switch does not have any VTP updates coming to it.
VTP Version : 2
Configuration Revision : 1
Maximum VLANs supported locally : 254
Number of existing VLANs : 5
VTP Operating Mode : Client
VTP Domain Name : XXXXXX
VTP Pruning Mode : Disabled
VTP V2 Mode : Enabled
VTP Traps Generation : Disabled
MD5 digest : 0x49 0x95
Configuration last modified by x.x.1.249 at 2-5-02 20:01:45
switch#
Has anyone out ther passed VTP information via the gigastack connectors? If
so, is there a secret to get it to work correctly? The switches that are
connected to the 6509 do have updated VTP information.
Thanks.
_________________________________________________________________
Send and receive Hotmail on your mobile device: http://mobile.msn.com
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=35971&t=35971
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
