should read all the mail before responding, forget my last message and I'll go back to scrathing my head;)
Dave Cisco Nuts wrote: > > OK, > > Finally got it to work!! Thank you so much Sasa and the rest of you for > helping me out. > > Here is what I did: (for others who might have a similiar problem) > > 1. Set the #config-register to 0x2101......Reloaded > > 2. Did a #erase flash....Deleted the 2nd partition > > 3. Did a #partition flash 1 16 > > 4. Erased the flash #erase flash > > 5. Set an #ip default-gateway and ip tftp source-interface cmd. > > 6. Did a #copy tftp flash.....Bingo it worked beautifully!!! :-) > > Thank you all once again for your help. > > >From: Sasa Milic >To: Cisco Nuts >Subject: Re: 16MB Flash (Read) & > (Read/Write) on a 2524 ?? [7:35989] >Date: Wed, 20 Feb 2002 17:47:01 > -0800 > > > > Erase and Unpartition flash...Which one?? Not clear on this > > > Is this what I do? And would you mind if you clarified step # 3. > > >When you try to erase flash, with "erase flash:", it will show >you two > partitions, one with the image, and will ask for a >confirmation to > delete the file. When both partitions are empty, >you can go into config > mode, and type "no partition flash", or >"partition flash 1 16". > >Be > sure to save old image and config ! > >Hope this helps. > >Regards, > > Sasa > > ------------------------------------------------------------------------ > > Join the worlds largest e-mail service with MSN Hotmail. Click Here -- David Madland Sr. Network Engineer CCIE# 2016 Qwest Communications Int. Inc. [EMAIL PROTECTED] 612-664-3367 "Emotion should reflect reason not guide it" Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=36075&t=36075 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
