Is Nat on on the NJ router? If so, just Nat from CA only. -- RFC 1149 Compliant.
""Kurdziel Peter"" wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > Does anyone know of any issues using the IP helper-address and domain > browsing while using NAT? > > > I have 2 locations, CA and NJ. > CA has a connection to the internet, NJ does not. CA and NJ are connected > via a point-to-point link via their serial insterfaces. With the help of > NATting NJ now is able to access the internet via the router in CA. > > My problem is that I need the servers at each location to replicate their > WINS databases. To try and solve this issues I added IP Helper-adress to the > serial point to point link on both side. If I remove the ip nat inside or > the ip nat outside command from either the fastethernet or the serail > interfaces I can broswe the domain and replicate the Wins database in either > location. But the NJ location does not have internet access. > > What do I need to do to enable both browsing to and from either location and > Internet access at both locations. > > > Here is a copy of my config from both locations. > > hostname California > ! > enable secret > ! > ! > ! > ! > ! > memory-size iomem 25 > ip subnet-zero > ! > ! > ! > ! > interface Serial0 > description Connection to ISP > ip address 10.0.10.1 255.255.255.252 > ip nat outside > no fair-queue > > > interface Serial1 > description point to point t1 to New Jersey > ip address 192.168.254.2 255.255.255.252 > ip helper-address 10.0.3.40 ***Server's IP in New Jersey***** > no fair-queue > ! > interface FastEthernet0 > ip address 10.0.2.1 255.255.255.0 secondary > ip address xxx.xxx.xxx.155 255.255.255.248 > ip nat inside > speed auto > ! > ip nat pool local xxx.xxx.xxx.155 xxx.xxx.xxx.155 prefix-length 28 > ip nat inside source list 1 pool local overload > ip nat inside source static 10.0.3.40 xxx.xxx.xxx.156 extendable > ip classless > > ip route 0.0.0.0 0.0.0.0 serial0 > ip route 10.0.3.0 255.255.255.0 192.168.254.1 > ip route xxx.xxx.xxx.0 255.255.255.248 192.168.254.1 > > > no ip http server > ! > access-list 1 permit 10.0.2.0 0.0.0.255 > ! > line con 0 > password > line aux 0 > password > line vty 0 4 > password > ! > end > > > ************************************************ > hostname NewJersy > ! > enable secret > ! > ! > ! > ! > ! > memory-size iomem 25 > ip subnet-zero > ! > ! > ! > ! > interface Serial0 > description point to point t1 to California > ip address 192.168.254.1 255.255.255.252 > ip nat outside > no fair-queue > service-module t1 timeslots 1-24 > ! > interface FastEthernet0 > ip address 10.0.3.1 255.255.255.0 secondary > ip address xxx.xxx.xxx.46 255.255.255.248 > ip helper-address 10.0.2.9 ***Server's IP in California***** > ip nat inside > speed auto > ! > ip nat pool local xxx.xxx.xxx.46 xxx.xxx.xxx.46 prefix-length 28 > ip nat inside source list 1 pool local overload > ip nat inside source static 10.0.3.40 xxx.xxx.xxx.45 extendable > ip classless > ip route 0.0.0.0 0.0.0.0 192.168.254.2 > no ip http server > ! > access-list 1 permit 10.0.3.0 0.0.0.255 > ! > line con 0 > password > line aux 0 > password > line vty 0 4 > password > ! > end Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=36204&t=36089 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
