It's working 'as advertised' Nnanna
PS if u issue the command 'no keepalive' on your serial interface, the bri should kick in -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Cisco Nuts Sent: Monday, February 25, 2002 4:45 PM To: [EMAIL PROTECTED] Subject: standby int bri0 - Not working? [7:36433] Hello, I have 2 routers Remote and Central connected by 56k links and also isdn bri(Lab enviroment) On Remote, I have the standby command with delay for 5 5 configed. When I shut the serial intf. on Remote, the bri does not come up. But when I shut down the corresponding serial on the Central router, the bri does come up on Remote and pings work!! Just curious as to if this only works the way it is working now or should it also work if I shut off the intf. on the Remote router. Thank you. _________________________________________________________________ Get your FREE download of MSN Explorer at http://explorer.msn.com/intl.asp. _________________________________________________________ Do You Yahoo!? Get your free @yahoo.com address at http://mail.yahoo.com Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=36437&t=36433 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
