Hello, Have 2 routers connected back-to-back via 2 serials with ppp encap and ppp multilink cmds. configed on both. This creates a virtual intf. Virtual-Access 1. I can ping to networks on both routers via this virtual intf. but I cannot ping the serial ip's itself. Is this how this is supposed to work? I mean, how come I cannot ping the serial ip when this very same serial intf. gets me to networks on that router? Thank you.
Output: Central#ping 20.20.20.1 --------> netw. on the other router Type escape sequence to abort. Sending 5, 100-byte ICMP Echos to 20.20.20.1, timeout is 2 seconds: !!!!! Success rate is 100 percent (5/5), round-trip min/avg/max = 28/28/28 ms Central#ping 5.5.5.1 ---------> the serial ip on the other router Type escape sequence to abort. Sending 5, 100-byte ICMP Echos to 5.5.5.1, timeout is 2 seconds: ..... Success rate is 0 percent (0/5) With the ppp multilink cmd. removed: Central#ping 5.5.5.2 Type escape sequence to abort. Sending 5, 100-byte ICMP Echos to 5.5.5.2, timeout is 2 seconds: !!!!! Success rate is 100 percent (5/5), round-trip min/avg/max = 72/76/84 ms Central# Any ideas. Thank you. _________________________________________________________________ MSN Photos is the easiest way to share and print your photos: http://photos.msn.com/support/worldwide.aspx Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=36549&t=36549 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
