It is no longer a 12000-only feature. MFR is now available for 2600's, 3600's, 3700's (don't know what kind of router that is, but it's listed in there, and 7200's.
""Chuck"" wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > this news will surely disappoint the woman who posted the question. If > memory serves,she works for a company that probably does not have 12xxx's in > their lineup > > Chuck > > ""MADMAN"" wrote in message > [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > > Yes I have since you pointed that out. Know what it means to > > ASSume!! It is a 12000 series only feature at this point. > > > > Dave > > > > Chuck wrote: > > > > > > according to the information in the link, this feature is supported only > on > > > the 12000 series. Anyone checked to see if the feature has been migrated > > > down to other platforms as newer IOS's are released? > > > > > > ""MADMAN"" wrote in message > > > [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > > > > You want to get fancy you can try multilink frame relay: > > > > > > > > > > > > > > http://www.cisco.com/univercd/cc/td/doc/product/software/ios120/120newft/120 > > > limit/120s/120s17/17s_mfr.htm > > > > > > > > Then again if you want it simple and to work do what Patrick aluded > > > > to, enable CEF and on the interface choose your favorite switching > > > > mechanism, per packet or per destination. > > > > > > > > Dave > > > > > > > > Patrick Ramsey wrote: > > > > > > > > > > well you wouldn't really "bind" them...but, if you were using a > routing > > > > > protocol such as ospf, then it could round robin packets for you. > > > > > > > > > > -Patrick > > > > > > > > > > >>> beth 02/19/02 10:34AM >>> > > > > > I have several 256k frame relay circuits some coming back to same > host > > > > > circuit > > > > > my question is , is there anyway to way to bind a couple of these on > a > > > > router > > > > > to increase bandwidth to 512k?? > > > > > >>>>>>>>>>>>> Confidentiality Disclaimer This email and any > files > > > > transmitted with it may contain confidential and > > > > > /or proprietary information in the possession of WellStar Health > > System, > > > > > Inc. ("WellStar") and is intended only for the individual or entity > to > > > whom > > > > > addressed. This email may contain information that is held to be > > > > > privileged, confidential and exempt from disclosure under applicable > > > law. > > > > If > > > > > the reader of this message is not the intended recipient, you are > > hereby > > > > > notified that any unauthorized access, dissemination, distribution > or > > > > > copying of any information from this email is strictly prohibited, > and > > > may > > > > > subject you to criminal and/or civil liability. If you have received > > > this > > > > > email in error, please notify the sender by reply email and then > delete > > > > this > > > > > email and its attachments from your computer. Thank you. > > > > > > > > > > ================================================================ > > > > -- > > > > David Madland > > > > Sr. Network Engineer > > > > CCIE# 2016 > > > > Qwest Communications Int. Inc. > > > > [EMAIL PROTECTED] > > > > 612-664-3367 > > > > > > > > "Emotion should reflect reason not guide it" > > -- > > David Madland > > Sr. Network Engineer > > CCIE# 2016 > > Qwest Communications Int. Inc. > > [EMAIL PROTECTED] > > 612-664-3367 > > > > "Emotion should reflect reason not guide it" Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=36563&t=35854 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
