Dear Cisco Gurus,

Help me on NM-8AM(configure for dial-in), below is the config(sorry I cannot 
attached it trought Hotmail attachment facility.
******************************************
!
logging rate-limit console 10 except errors
enable secret 5 $1$q/PI$pF86FvbJ.2wOKe6PX74SD0

username test nopassword
modem country microcom_hdms indonesia
ip subnet-zero
no ip finger
!
no ip dhcp-client network-discovery

00:38:17: %SYS-5-CONFIG_I: Configured from console !        e
!
!
interface Ethernet0/0
ip address 192.168.2.2 255.255.255.0
half-duplex
!
interface Group-Async1
ip unnumbered Ethernet0/0
encapsulation ppp
async default routing
async mode interactive
peer default ip address pool POOL
ppp authentication chap pap
group-range 33 40
!
ip local pool POOL 192.168.2.3 192.168.2.11
ip classless
ip route 0.0.0.0 0.0.0.0 192.168.2.1
ip http server
!
!
line con 0

line 33 40
modem InOut
modem autoconfigure discovery
transport input all
autoselect ppp
stopbits 1
flowcontrol hardware
line aux 0
line vty 0 4
line vty 5 15

no scheduler allocate
end
**************************************


AND THE ERROR MESSAGE WHEN DIAL INTO THE ROUTER

------------------------------------
00:39:15: Modem 1/2 Mcom: in modem state 'Dialing/Answering'
00:39:16: Modem 1/2 Mcom: in modem state 'Incoming ring'
00:39:17: Modem 1/2 Mcom: in modem state 'Incoming ring'
00:39:18: Modem 1/2 Mcom: in modem state 'Waiting for Carrier'
00:40:18: Modem 1/2 Mcom: Received unknown message 0x10, len=0

00:40:18: Modem 1/2 Mcom: in modem state 'Disconnecting'
00:40:18: Modem 1/2 Mcom: DISCONNECT, duration = 00:00:00, reason (0x2) No 
carrier
------------------------------------

Thank You

HATO

_________________________________________________________________
Chat with friends online, try MSN Messenger: http://messenger.msn.com




Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=36778&t=36778
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]

Reply via email to