Reseat the Flash and the memory. This solved my PIX issue. neil ""Craig Columbus"" wrote in message news:[EMAIL PROTECTED].; > The cable is good and scroll lock isn't on. Same PC setup and cable work > fine on other 2500 series. I haven't run into this particular issue before. > > Craig > > > At 11:50 AM 3/5/2002 -0500, you wrote: > >Have you tried a different cable? > > > > > >----- Original Message ----- > >From: "Craig Columbus" > >To: > >Cc: > >Sent: Tuesday, March 05, 2002 11:18 AM > >Subject: Stupid 2500 confreg question > > > > > > > Has anyone run into an issue where a 2500 series router won't respond to > > > console input? > > > Here's the deal: > > > The PC is running 9600-8-N-1 and is connected to the 2500 console port. > > > The router has had nvram erased and is being booted for the first time. > > > Upon boot, the normal boot process is seen on the monitor screen. > > > When prompted to enter configuration dialogue, it's not possible to input > > > anything on the router. Typing does nothing and there is no response > from > > > the router. > > > If Ctrl-F6-Break is pressed during boot, the router goes to the > prompt, > > > but after that, the router still won't accept any input from the console > >port. > > > > > > Has anyone experienced this issue? Is this a config register problem? > If > > > so, is there a fix other than experimenting with different settings on > the > > > PC side? If not, does anyone have an answer? Could it be bad boot ROM? > > > > > > Thanks, > > > Craig > > > _________________________________________________________________ > > > Commercial lab list: http://www.groupstudy.com/list/commercial.html > > > Please discuss commercial lab solutions on this list. > >_________________________________________________________________ > >Commercial lab list: http://www.groupstudy.com/list/commercial.html > >Please discuss commercial lab solutions on this list.
Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=37289&t=37287 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
