Ranma- Providing you have at least enough RAM (implying that you could set the router up to do a TFTP load of its IOS image for operation, as I'm doing temporarily), you could use the following image without any problem.
12.2(2T) (works like a charm with my FXS cards) Caveat: I don't have an E&M card to verify against, but I bet it'll still work. the RAM/FLASH req's are: 40/16, which means the 1750 will need to have its memory maxed, as well as its flash. I suspect that since you have a 4V model, that shouldn't be a problem. Most 4Vs come with 32/16, and you can get the RAM upgraded to 48 by purchasing a 32MB chip from Crucial.com.... ... and the cool thing about Crucial is that FedEx 2Day is Free! Note: I have no affiliations to Crucial, I'm just really happy with their price/service. Good luck. Mark -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Ranma Sent: Tuesday, March 05, 2002 12:46 AM To: [EMAIL PROTECTED] Subject: Cisco 1750 VIC-2 E/M Voice card problem [7:37236] Hi, anyone has the following problem ? I have an Cisco 1750 - 4V chassis and 2 voice E&M Card Now after follow Cisco Recomendation and using IOS 12.1(5)T the machine cannot recognize the Voice E&M Daughter cards. And use "show run" , no voice-port appear. After claiming RMA with Cisco, the same problem appear in the new Router. Anyone have the solution to this problem? Kenny Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=37301&t=37236 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
