# 2. # 1 wont won't work as it doesn't specify the eq portion. It should ( at least on 5.2 code ) generate an error.
All this is assuming that 200.200.200.0 is the correct source and 10.10.0.0 255.255.0.0 is the correct destination. Thanks Larry -----Original Message----- From: Ivan [mailto:[EMAIL PROTECTED]] Sent: Tuesday, March 05, 2002 7:22 PM To: [EMAIL PROTECTED] Subject: PIX Access-list Problem. [7:37336] Hi all, I have a problem, does anyone can give me a answer? Which the following access-list is right to allow only telnet? 1. access-list 100 permit tcp 200.200.200.0 255.255.255.0 10.10.0.0 255.255.0.0 23 2. access-list 100 permit tcp 200.200.200.0 255.255.255.0 10.10.0.0 255.255.0.0 eq 23 Thank you very much. Ivan Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=37340&t=37336 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
