See what happens when you don't have an "Official" Cisco Secret Decoder Ring? :)
Hey, Chuck, am I in danger of the Ring Wraiths trying to get it away from me? Prof. Tom Lisa, CCAI Community College of Southern Nevada Cisco ATC/Regional Networking Academy "Lupi, Guy" wrote: > Excellent, thanks. I will have to send an email to Boson to let them know > there is an issue with the calculator. > > -----Original Message----- > From: Larry Letterman [mailto:[EMAIL PROTECTED]] > Sent: Wednesday, March 06, 2002 12:59 PM > To: [EMAIL PROTECTED] > Subject: config 0x2922 [7:37438] > > In the 2501, 0x2922 does allow a break from my term window > and sets the baud rate of the console to 4800.... > > Larry Letterman > Cisco Systems > [EMAIL PROTECTED] > > -----Original Message----- > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of > Sexton, Ken > Sent: Wednesday, March 06, 2002 9:24 AM > To: [EMAIL PROTECTED] > Subject: RE: the RD [7:37401] > > The RDs in the RIF should always be represented in Hex format. When defining > the source-bridge command on the router you define as decimal format. > > However, with that said, you'll see test questions with the decimal > equivalence within the RD fields. In either case, I would know how to > convert in both directions, that way you're prepared no matter how it is > presented. > > Ken Sexton > Data Network Engineering > ICG Communications > [EMAIL PROTECTED] > > -----Original Message----- > From: Mckenzie Bill [mailto:[EMAIL PROTECTED]] > Sent: Wednesday, March 06, 2002 9:47 AM > To: [EMAIL PROTECTED] > Subject: Re: the RD [7:37401] > > O.k. > > Let me re phrase my question. How important is it to know how to conevert > the RD into hexidecimal? I have the RII and the RIF but then a couple of > papers I read stated, and now the easy part...the RD, and then I'm lost. > > Any help? Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=37459&t=37438 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
