Thank you for your feed back Peter,
I also tried to add ALL the interface by using below command
ospf add interface all to-area backbone
And then tried to set some of the interfaces passive, individually.
ospf set interface xxx.xxx.xxx.xxx passive
but this failed, so I tried using interface name.
ospf set interface InterfaceName passive.
But this also gave me the same error meesage that the interface
is not recognized.
I tried Riverstone Homepages and tried to get more info,
but with no avail.
Would anybody like to share his/her knowledge?
============================================================
Never touched a Riverstone box before, but your summary-range certainly
looks much more like type 3 summarizing rather that adding interfaces to
the ospf process.
At 01:27 AM 3/7/2002 -0500, you wrote:
>Hello everybody,
>
>I know this doesn`t have much to do with Cisco,
>but if anyone would like to share his/her knowledge,
>I would be very grateful.
>Has anyone worked with Riverstone RS3000 before?
>I have set up OSPF backbone area on RS 3000,
>
>ospf create area backbone
>
>Then I wanted all the ports to autumatically belong to the backbone area.
>So I tried below.
>
>ospf add summary-range xxx.xxx.xxx.xxx./xx to-area backbone
>
>Then I wanted some of the ports to be set passive so that
>networks that are connected to the ports and my backbone area
>wouldn`t exchange routing info.
>
>ospf set interface xxx.xxx.xxx.xxx passive
>
>I thought this would be sufficient but I got an error message saying that,
>the system doesn`t recognize the interface xxx.xxx.xxx.xxx.
>I DID try to add individual interface to backbone area and
>set them passive individually then it worked.
>But as more network is attached to the RS3000.
>This will be alot of work.
>
>Does anyone have any idea?
>
>Thank you very much in advance.
>
>sean k`
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=37605&t=37523
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
