I never experienced such "stall mode" problem when changing IOS between three IOSes on a router`s flash. See below:
lone_rhino#sh flash System flash directory: File Length Name/status 1 10630360 c3640-is-mz_121-5_T10.bin 2 4405204 c3640-js-mz.112-18.P.bin 3 13955200 c3640-a3jk8s-mz.122-1c.bin [28990956 bytes used, 4039188 available, 33030144 total] 32768K bytes of processor board System flash (Read/Write) lone_rhino# > I recently uploaded a new IOS to a flash card on a cisco device and > did not reboot it, I just left it up there so I could relod it al a later > time. I set the boot prompt to boot from the new IOS though. > For some reason a dumb ass colegue at work thinks there might > be a bug in the IOS (ver 12.6) that makes the router go into stall > mode when 2 IOS images reside in the IOS. I > was wondering, has any one else experienced this ? Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=37645&t=37628 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
