it is probably that your switch does have Enterprise code.
Catalyst 1900 Management Console
Copyright (c) Cisco Systems, Inc. 1993-1998
All rights reserved.
Enterprise Edition Software
Ethernet Address: 00-D0-06-81-24-40
PCA Number: 73-3122-03
PCA Serial Number: FAB03203536
Model Number: WS-C1912-EN
System Serial Number: FAB0323U01C
Power Supply S/N: PHI031302VU
PCB Serial Number: FAB03203536,73-3122-03
-------------------------------------------------
1 user(s) now active on Management Console.
User Interface Menu
[M] Menus
[K] Command Line
[I] IP Configuration
Enter Selection:
*************************
notice the WS-C1912-EN in the Model Number.
also from the Firmware menu:
Catalyst 1900 - Firmware Configuration
----------------------- System Information -----------------------------
FLASH: 1024K bytes
V8.01.02 : Enterprise Edition
Upgrade status:
No upgrade currently in progress.
----------------------- Settings ---------------------------------------
[S] TFTP Server name or IP address
[F] Filename for firmware upgrades
[A] Accept upgrade transfer from other hosts Enabled
----------------------- Actions ----------------------------------------
[T] System TFTP upgrade [X] Exit to Main Menu
Enter Selection:
*************************
notice that it says: V8.01.02 : Enterprise Edition
****************************
check to see if youo are running Enterprise code
Kevin Wigle
----- Original Message -----
From: "Raza Shah"
To:
Sent: Sunday, 10 March, 2002 14:15
Subject: CLI for 1900 Switch [7:37802]
> Hi All,
>
> I am looking how to access CLI on a 1900 Switch.
>
> When I start the switch, I get "User Interface Menu" with only two
> options:
>
> [M] Menu
>
> [IP] IP
>
> And always [K] Command Line options are missing. How to access CLI, any
> advice?
>
> Raza Shah
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=37808&t=37802
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
