Hi there,
I have a setup where I think I 'd need to use CQ but the documents that
I found at cisco's site where not enough to understand / "master" the
subject.
Here is my scenario :
I have a cisco 1750 in my branch office and another one on a remote
site. Each cisco has two leased lines, one PPP and the other
Frame-relay, both operating with 64K. I use VoIP to make the phone
calls and I have database systems located at the remote site.
I need to set up some sort of priority so I could optimize the
overall usage "reserving" bandwidth for more critical applications.
After searching I found that either policy routing or custom queue
should do the job (in one way or another), with CQ being the "correct" one.
Can you help me out ? The examples that I found were too simple for
me to make any kind of decision.
I am specially confused with the decision of setting a queue size.
Best regards,
Mario
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=37821&t=37821
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
