Below is a standard that we use when bonding T-1's together. No difference
on the Channelized DS-3.
interface Multilink1
description BONDED 2xT1s
bandwidth 3072
ip address x.x.x.x 255.255.255.252
ppp multilink
ppp multilink fragment-delay 10
ppp multilink interleave
multilink-group 1
interface Serial3/0:1
no ip address
encapsulation ppp
ppp multilink
multilink-group 1
interface Serial1/0:2
no ip address
encapsulation ppp
ppp multilink
multilink-group 1
Should be pretty much straight forward. Easy to implement and works great.
Woody
CCNP
-----Original Message-----
From: Fraasch James [mailto:[EMAIL PROTECTED]]
Sent: Tuesday, March 12, 2002 7:18 PM
To: [EMAIL PROTECTED]
Subject: PPP Multilink on Channelized DS3 [7:38029]
I was wondering if anyone has been able to PPP Multilink multiple channels
of a DS3 going into a 7206 (or other Cisco router). I have multilinked
multiple T1's going to seperate serial interfaces but have not tried to do
it on a channelized DS3. Initial search on Cisco's site does not give me
much to go on. The DS3 terminates directly into the router itself and we
are currently using 12 channels for different connections. I would like to
use two more channels to link up a new site.
Thanks in advance.
James
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=38091&t=38029
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
