True, But i think i'm looking at this more from a semantics issue where the book (or any other source) is saying... Now OSPF, since you are in an NBMA environment, you will default to a nonbroadcast behaviour, okay? But then if you do put him/her in a very NBMA netowrk, e.g. ATM, this "default" behaviour is not implemented properly, so we then knock his/her head and say, "You are now entering NBMA airspace..." My point is, it might have been less confusing if they just removed the "default behaviour" part and just stick to explaining how it works in different environments. As an instructor, i can see where a lot of students would get very confused with this sort of explanation from CCO. Thanks. Elmer
----- Original Message ----- From: "Wes " To: Sent: Thursday, March 14, 2002 2:09 PM Subject: RE: Last question on OSPF point-to-multi nonbroadcast [7:38189] > It's point-to-multipoint without automatic neighbor discovery. All the > advantages of P2M, with the added control of manually specifying your > neighbors. > > I don't usually use it - but it's another tool in the shed, just in case... > > --Wes Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=38375&t=38189 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
