Well, you haven't said what IOS or hardware you're using, which could make a difference. Have a look at the following URL - it may clear up your questions. I haven't read it thoroughly myself, but note the usage guidelines..."You can configure point-to-point software compression for all LAPB, PPP, and HDLC encapsulations. HDLC encapsulations supports the Stacker compression algorithm. PPP and LAPB encapsulations support both predictor and Stacker compression algorithms. " Note no mention of FR encapsulation.
http://www.cisco.com/univercd/cc/td/doc/product/software/ios121/121cgcr/inter_r/irdacces.htm#1019592 JMcL ----- Forwarded by Jenny Mcleod/NSO/CSDA on 19/03/2002 03:35 pm ----- "Cisco Nuts" Sent by: [EMAIL PROTECTED] 19/03/2002 01:49 pm Please respond to "Cisco Nuts" To: [EMAIL PROTECTED] cc: Subject: compress command unavailable on FR or hdlc intf??.....Why? [7:38746] Hello,Can't seem to get the compress command to work on Fr intfs....Also on hdlc inft. only the stac compression shows up.... Any reason as to why?? Ex. On a FR inft.RTD(config)#int s0/0 RTD(config-if)#compress ? % Unrecognized command On a PPP intf.........OKRTB(config-if)#compress ? mppc MPPC compression type predictor predictor compression type stac stac compression algorithm On a HDLC intf.RTC(config)#int s 0 RTC(config-if)#compress ? stac stac compression algorithm Thank you for your help. ------------------------------------------------------------------------ Join the worlds largest e-mail service with MSN Hotmail. Click Here Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=38753&t=38753 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
