I will give some of these a try, I have to admit I have been through most of the book already. See comments in line:
~-----Original Message----- ~From: IT Guy [mailto:[EMAIL PROTECTED]] ~Sent: Sunday, March 24, 2002 1:44 AM ~To: [EMAIL PROTECTED] ~Subject: Challenge Question from Karl solia Practical studies [7:39339] ~ ~ ~Hi guys, ~ ~I did a search on Karl solie End book Labs and here is the ~tough extract for ~you guys to get your help and comments. ~ ~ ~Q1.A Main frame resides on Vlan2 with three IP Addresses which ~coreesponds ~to single MAC address. Configure Router R4(vlan2) to suppot forwarding ~traffice to single MAC address for all three IP address??? Static arp entries will do this. I.E. 511(config)#arp 1.1.1.1 3.3.3 arpa 2511(config)#end 2511#sh arp Protocol Address Age (min) Hardware Addr Type Interface Internet 1.1.1.1 - 0003.0003.0003 ARPA ~ ~Q2 ~A large amount of IP fragmentation is occuring on VLAN2.Tune ~DLSW so that ~the IP fragmentation will not occur as soon???? Make the largest frame size 1500 with lf 1500, I have heard that you should even take it a little smaller, to like 1476. That should stop the fragmentation. ~ ~ ~Q3. Configure Rx such that workstations on Vlan30 can ~dynamically locate ~their default gways.They are not using DHCP?? (Page 1167) You could use IRDP here. ~ ~Q4 On R2, create a SAP filter blocking all saps starting with "fake" ~ Don't quote me on this one, but I believe that this would do it: access 1000 deny -1 0 fake* ~Q5.Configure VLan30 such that saps are advertised onlu when ~new server comes ~online? No idea, will have to find out. ~ ~Q6.Configure R1 as an NTP server. Configure peer asssociation ~such that R4 ~synchronize with R1. When R4 synchronized allow R2 and R3 to ~synchronize ~with R4. If R4 is not Synchronized with R1, R2 and R3 also should not ~synchronize?? ~ This is an interesting one, no idea, will have to try it. ~ ~Q7. COnfigure R1 so that when the user Unnamed logs into the ~router, its ~immdediately put in enable mode.(pg 1177) username unnamed privilege 15 password xxxx ~ ~Hope u will enjoy... ~ ~Thanks for u help. ~ ~TOM ~ ~_________________________________________________________________ ~Send and receive Hotmail on your mobile device: http://mobile.msn.com ~ ~ ~ ~ ~Report misconduct ~and Nondisclosure violations to [EMAIL PROTECTED] ~ Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=39373&t=39373 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
