hi all,
i can't ping to any host in the LAN although the fa0/0 shows up,up. sh int
fa0/0 described that there was a tremendous amount of interface reset, and
input rate is 0 what does it mean..? i did a shut/no shut on the the
interface fa0/0, then only i can ping to all LAN hosts...anybody pls
explain..is it the fa0/0 hardware problem..?
TQ
rgds
nazri
telekom malaysia
#sh int fa0/0
FastEthernet0/0 is up, line protocol is up
Hardware is i82543 (Livengood), address is 0005.dcff.4800 (bia
0005.dcff.4800)
Internet address is 128.x.x.x/16
MTU 1500 bytes, BW 100000 Kbit, DLY 100 usec,
reliability 255/255, txload 1/255, rxload 1/255
Encapsulation ARPA, loopback not set
Keepalive set (10 sec)
Full-duplex, 100Mb/s, 100BaseTX/FX
ARP type: ARPA, ARP Timeout 04:00:00
Last input 1d18h, output 00:00:00, output hang never
Last clearing of "show interface" counters 2d19h
Queueing strategy: fifo
Output queue 0/40, 0 drops; input queue 0/75, 2 drops
5 minute input rate 0 bits/sec, 0 packets/sec
5 minute output rate 1000 bits/sec, 1 packets/sec
2102161 packets input, 554423320 bytes
Received 0 broadcasts, 0 runts, 0 giants, 2 throttles
0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored
0 watchdog
0 input packets with dribble condition detected
1395595 packets output, 197677953 bytes, 0 underruns(0/0/0)
0 output errors, 0 collisions, 4294967295 interface resets
0 babbles, 0 late collision, 0 deferred
6 lost carrier, 0 no carrier
0 output buffer failures, 0 output buffers swapped out
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=39406&t=39406
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
