The next time this happens sh sessions from the cli look for the session number that corresponds to the host in question. type the session number only the session should reconnect. you can run disconnect (session number) to clear the session. Or for ease of use configure ip hosts ip host port loopback address.
Terry L. Hines Enterprise Trainer CompuTouch Training Microsoft - Infrastructure - Security Cisco / 3COM / Nortel / Extreme -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] Sent: Wednesday, March 27, 2002 2:37 PM To: [EMAIL PROTECTED] Subject: question on cisco lab [7:39683] Im using a terminal server connected to my routers for my built cisco lab. however everytime that i change the ip address or modify the configuration i can do a reverse telnet to the router? i need to plug in a laptop and modify the con 0 line again is there a reason for this. I thought that once you set this settings and if screw up on the ip;s their always a backdoor? terminal-server#telnet router1 Trying router1 (172.21.1.1, 2001)... % Connection refused by remote host George Gittins Internet Systems Manager Weslaco, Tx 78599 Phone (956)9696557 Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=39705&t=39683 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
