Mocking up a partial mesh frame relay lab running OSPF. Hub router = multipoint subinterface (default OSPF network type = Nonbroadcast) Spoke router = point-to-point subinterface (default OSPF network type = point-to-point)
I know that the point-to-point network type setting will cause adjacencies to form and no DR/BDR selection. But why is the adjacency forming between the hub router (OSPF network type = Nonbroadcast) and the spoke router (OSPF network type = pt-to-pt) when there are network type mismatches? 'debug ip ospf adj' shows the hello packets being exchanged with no comoplaints about mismatched parameters. I have searched the CCO website but am not able to find anything explaining this. Can some elaborate please or point me in the right direction. Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=40240&t=40240 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
