im Sorry for not putting my ip address scheme i hope it makes more sense!
sorry larry
Im currently going over the routing class so i can practice for my ccie . I
know its a good review and will help me have a more solid understanding of
routing... i tried to make this simple scenario and for some reason its not
working maybe im missing something.
my setup is the following
(s1)
(s0)backbone router---s1-----r1
| |(e0)
| |
(SO) | |
r4 (s1) r2(e0)
| |
| (s0) |
r3
now i enable igrp 200 for all the router
the serial links for r4 s0 10.1.1.1 /24
r4 s1 192.168.1.17 /28
backbone so is 10.1.1.100 /24 and s1 10.12.12.100 /24
and the serials for r3 192.168.1.18 /28
r2 e0 192.168.1.34/28
and 192.168.0.0 network. whe i do a ip route
in backbone router for 192.168.X.x i get network not in table ? why?n if i
am advertising it should't the other routers show it whithin their routing
tables i have the running config
if that helps
I can ping from r3 to r4 however after but unable to get the backbone router
same applies to the r2
i have on backbone router & r4 7r1
igrp 200
network 10.0.0.0
network 192.168.0.0
how come if all the routers are running the same routing protocol i cant see
the 10.0.0.0
routers advertised
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=40640&t=40625
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
