Tim,
Change your Supervisor! From what Manny Gonzalez found out from
numerous Cisco sources, it's almost impossible. There are some diagnostic
versions of code that support it, but probably not available to most of us.
Chuck Church
Sr. Network Engineer
CCIE #8776, MCNE, MCSE
US Tennis Association
70 W. Red Oak Lane
White Plains, NY 10604
914-696-7199
-----Original Message-----
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
Timothy Ouellette
Sent: Thursday, April 11, 2002 2:30 AM
To: [EMAIL PROTECTED]; [EMAIL PROTECTED]
Subject: Change the Bridge ID on a cat5k
Scouring cisco for an answer that someone mentioned.
I'm trying to change the Bridge-ID (BID) for a particular vlan on a
cat5k. I know it's possible if I just change the priorty for that
particular vlan. Is it possible to change the mac address on a vlan so
that the BID will change without change the prioty. Here's the question
that was posed "how does one change the bridge ID for VLAN 200 on a
Catalyst 5000 (os is 5.5(10)b"
Can anyone help?
Tim
_________________________________________________________________
Commercial lab list: http://www.groupstudy.com/list/commercial.html
Please discuss commercial lab solutions on this list.
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=41177&t=41177
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
