now if he recited that from memory, we should all just throw in the towel.... hehe :) I certainly suck at math anyway...reciting some crazy formula to calculate latency would send me over the edge!
>>> "Priscilla Oppenheimer" 04/11/02 02:44PM >>> Great answer! Priscilla At 02:01 PM 4/11/02, Kent Hundley wrote: >There are several factors: > >1) Clock rate of the line >2) Buffering delay by any intermediary devices such as ATM/FR switches >3) Speed of light > >If we take a simple case and say that there are no layer 2 devices in the >path and only digital cross-connects. I have read (somewhere) that the >speed of electron transference in copper is a little faster than the speed >of light in fiber over short distance, so use the speed of light in fiber >(roughly .7 X 186,000 miles per second) as the baseline. (note that the >reference given by another poster says the speed of electromagnetic signals >in copper is .66 of the speed of light, which would mean it is slightly >slower than speed of light in fiber, either way its pretty close to a wash) >Given these assumptions you get: > >speed of a single bit = speed of line insertion for 1 bit + speed of light >delay + speed of line removal for 1 bit > >speed of line insertion for 1 bit = speed of line removal for 1 bit = >1/clock rate > >speed of light delay = number of miles / (.7 * 186000 miles per second) > > > >As an example, for a clock rate of 128Kbps and a distance of 1000 miles: > >speed of line insertion and removal for 1 bit = 2 * (1/128000) = .000015625 >sec = .015625 ms > >speed of light delay = 1000 / (.7 * 186000) = .00768 sec = 7.68 ms > >7.68 ms + .015625 ms = 7.7 ms (roughly) > >Again, this assumes no delay in buffering in the path of any kind. It also >assumes that there is no congestion at either end of the link. Bottom line, >keep in mind these are rough numbers, but I think you get the idea. > >HTH, >Kent > > >-----Original Message----- >From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of >Matthew Tayler >Sent: Thursday, April 11, 2002 9:01 AM >To: [EMAIL PROTECTED] >Subject: How fast do bits travel ? [7:41192] > > >Ok I have spent ages trying to find an answer to this question, and probably >only added to my confusion. You know how it is you spend ages looking at >something and become snow blind or get tunnel vision or whatever, but I >cannot see the answer to the following: > >How far does a bit travel in say 1 second or put another way how long does a >bit take to travel a certain distance ? > >I understand, or think I do that if the line is say 128kbps then I can, in >theory at least, expect 128,000 (approx) bits start down that line every >second. > >But how long do they take to reach the other end, assuming a point to point >link and both ends being the same speed, obviously. > >There has to be a nice simple formula for this somewhere, you know the sort >of thing x= line speed, y = distance z = time etc > >Any ideas or poitners would be appreciated > >Thanks ________________________ Priscilla Oppenheimer http://www.priscilla.com >>>>>>>>>>>>> Confidentiality Disclaimer <<<<<<<<<<<<<<<< This email and any files transmitted with it may contain confidential and /or proprietary information in the possession of WellStar Health System, Inc. ("WellStar") and is intended only for the individual or entity to whom addressed. This email may contain information that is held to be privileged, confidential and exempt from disclosure under applicable law. If the reader of this message is not the intended recipient, you are hereby notified that any unauthorized access, dissemination, distribution or copying of any information from this email is strictly prohibited, and may subject you to criminal and/or civil liability. If you have received this email in error, please notify the sender by reply email and then delete this email and its attachments from your computer. Thank you. ================================================================ Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=41219&t=41192 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
