While we're off-topic (somewhat) - What are people doing for non-Ethernet traffic analysis? I'm specifically interested in T1 and V.35 interfaces
I've used Sniffers for this in the past with quite a bit of success however given the current state of the economy, etc. my current client is interested in seeing what their options are in this area. Obvously in the Ethernet Market there's Ethereal, Etherpeek, Network Instruments, etc. My preference would be to have the same interface (assuming it would be GUI...) regardless of the network technology being analyzed. I've been spoiled by the "distributed sniffer" product for remote sniffing and am looking for similar functionality. Thanks for the input. Ben ----- Original Message ----- From: "supernet" To: Sent: Friday, April 12, 2002 12:42 AM Subject: traffic analyzer [7:41267] > Hi Dear Friends, > > I have 1 branch office connected to main office by frame relay. I noticed a lot of traffic across this link and would like to find out > what they are. The problem is I don't have access to the branch office, > therefore, everything has to be done in main office. I tried sniffer > pro, etherpeek and anasil but they only allow me to specify a particular > source IP, not the whole branch office subnet. Is there any other > software I can use? > > Thanks. > Yoshi Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=41343&t=41343 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
