Use the show line command to find out what the line number is and you can set the flow control for the line in the line configuration.
conf t line xxx<--- line number flowcontrol software|hardware|none software for xon/xoff hardware for cts/rts none for well none =P HTH Don Nguyen Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=41464&t=41433 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
