Can you configure Appletalk routing between VLAN's on cat4006sup3? Best regards,
""MADMAN"" wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > I just got a supIII installed in the lab a couple days ago and I don't > see any multi vlan options aside from a trunk: > > C4006SUPIII(config-if)#switchport ? > access Set access mode characteristics of the interface > host Set port host > mode Set trunking mode of the interface > nonegotiate Device will not engage in negotiation protocol on this > interface > private-vlan Set the private VLAN host association or promiscuous > mapping > trunk Set trunking characteristics of the interface > > > C4006SUPIII(config-if)#switchport acc > C4006SUPIII(config-if)#switchport access ? > vlan Set VLAN when interface is in access mode > > As far as appletalk is concerned yes you need a appletalke capable > router or bridge it. > > Dave > > As > > Cisco Breaker wrote: > > > > Hi All, > > > > Our customer wants to buy cat 4006 with sup3. But they use Appletalk. As I > > know the sup3 IOS doesnt support Appletalk routing yet, so I have to put a > > router for that, am I right? > > > > And also is it possible to assign the server's port into 2 vlans. If I > can > > put the server's port which is on the switch to 2 Vlans (multi Vlan) it > will > > be OK but is it possible? > > > > Any help will be appreciated. > > > > Best regards, > > > > Cisco Breaker > -- > David Madland > Sr. Network Engineer > CCIE# 2016 > Qwest Communications Int. Inc. > [EMAIL PROTECTED] > 612-664-3367 > > "Emotion should reflect reason not guide it" Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=41601&t=41571 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
