use the 'set password' command to change the login password of the cli. use the 'set enablepass' command to change the password for the privileged level of the cli.
""Magichut"" wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > Hello, > > I have the silliest question. It should be simple, but it's not turning > out that way. I have a Cisco ws-c2900 series switch with a sup. eng. on it. > It has a console port, 2 mdi ports and a reset button (no Mode button). I > am merely trying to reset the password. the company that owns the switch > lost their IT guy and need to reset the vlans. I can get to enable mode by > cycling the switch and initially logging in within seconds of boot up. but > cannot reset the password. I can change the vlans, reset gateways, and > everything but reset the password. any help would be appreciated here. > > Thanks, > Magichut Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=41685&t=41680 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
