Hi Paul,
To Explain this pls understand these terminology ,
NAT command - Is required when the traffic flows from Higher security
level to lower security Level,You must configure this Even if you dont want
to translate the inside address . (i.e use nat 0 in this case).This
statement defines the internal network address which you want to translate.
Global -- Is only required when you want to do Network Address Translation
when the traffic flows from higher security level to lower security
level.This statement provides the Translated address for the network
connected to the lower security level.
Static - Is required when the traffic flows from lower security level to
higher security level.This configuration is must.
Access-list - Can be used in both direction.This defines what is accessible
in each direction.
Kind Regards /Thangavel
186K
Reading,Brkshire
Direct No -0118 9064259
Mobile No -07796292416
Post code: RG16LH
www.186k.co.uk
----------------------------------------------------------------------
The greatest glory in living lies not in never falling,
but in rising every time we fall ."
-- Nelson Mandela
--------------------------------------------------------------------
"Paul"
cc:
Sent by: Fax
to:
[EMAIL PROTECTED] Subject: Basic PIX
clarification ... [7:41779]
om
17/04/2002
22:59
Please respond
to
"Paul"
Are the following statements correct ???
Connections on the Pix are defined as either from lower to higher
security level or higher to lower security level.
Higher to Lower security connections are controlled by the access-list
command.
Lower to Higher security connections are controlled by nat and global
commands.
Any help on clearing this will help me enormously ...
Many thanks in advance ...
Paul ..
**********************************************************************
This e-mail is from 186k Ltd and is intended only for the
addressee named above. As this e-mail may contain confidential
or priveleged information, if you are not the named addressee or
the person responsible for delivering the message to the named
addressee, please advise the sender by return e-mail. The
contents should not be disclosed to any other person nor copies
taken.
186k Ltd is a Lattice Group company, registered in England
& Wales No. 3751494 Registered Office 130 Jermyn Street
London SW1Y 4UR
**********************************************************************
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=41815&t=41779
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
